If you switch on the switches centered horizontally  

or centered vertically , the text is centered in the embroidery field.

In the input field beside you can type in a value for the distance from the 

left down corner of the embroidery field.

If the switch distance from the left side is switched on, 

you have to input a distance in millimeter. This is extremely 

important, if you want to place a design at the right or left 

hand side of the design. A free space at the right side of the 

text can be achieved by inputting a distance from the left of 0 

and a text length shorter than the ribbon length.

If the switch distance from the bottom is switched on, 

the base line of the text is placed on this level. If there is an 

underlength, for example the letter “g”, it stands out under 

that length. Of course the base line plus the text size must 

not be higher than the embroidery field height.


Created with the Personal Edition of HelpNDoc: Transform your help documentation into a stunning website