1. Keyboard in all modes

Ctrl + B        Display block film

Ctrl + J        Fade in or out horizontal or vertical auxiliary lines

Ctrl + L        Ruler function

Ctrl + N        Open new design with standard values

Ctrl + O        Open design administration

Ctrl + R        Repeat view on/off 

Ctrl + S        Save current design (overwrite)

Ctrl + T        True View on/off

Ctrl + W        Redraw complete design (fade in everything)

Ctrl + Y        Display order of embroidery

Ctrl + Z        Redraw design

F1        Activate help system

F2        Fade out stitches

F3        Fade out coordinates

F4        Open dialogue to fade out needles

F6        Display next window

F10        Start transmission to machine

F11        Fade in/out picture

F12        Fade out/in background picture

Ctrl + F1        Store design in ZSK-memory

Ctrl + F2        Store design in ringbuffer

Ctrl + F5        Activate VOMAG check

Shift + F6         Open previous window

Alt + Home        Zoom to display all blocks

PgDn        Zoom up one step

Alt + PgDn        Choose largest possible zoom factor

PgUp        Zoom down one step

Alt + PgUp        Zoom to 1:1

Alt + End        Edit box zoom factor

Esc        Cancel current function

+        Activate Zoom by mouse rectangle


Special function with “Scroll Lock” key active:

Arrow keys        Move the visible area in the desired direction

Mouse wheel        increase / decrease zoom factor



2. Keyboard in module mode

Ctrl + A        Select all

Ctrl + C        Copy selected blocks (into the Clipboard)

Ctrl + D        Duplicate selected blocks

Ctrl + G        Group selected blocks

Ctrl + P        Set start- and endpoint

Ctrl + V        Insert a copied block.

Ctrl + W        Redraw design.

Ctrl + X        Cut selected blocks (into the Clipboard)

Ctrl + Z        Redraw

Alt + Z        Redraw block

Ctrl + PgUp        Set block one step forward

Ctrl + PgDn        Set block one step backward

Shift + PgUp        Set block to the front

Shift + PgDn        Set block to the back

Shift + Ins        Insert a copied block.

Ctrl + Ins        Copy selected blocks (into the Clipboard)

Shift + Del        Delete selected blocks and copy them into the clipboard

Alt + Z        Center modules

1        Text on curve: Adjustment by size

2        Text on curve: Adjustment by width

3        Text on curve: Adjustment by distance

Spacebar        Screen shifting, so the selected module is in the centre of the screen

Arrow keys        Select previous / next module



3. Keyboard in text mode

Ctrl + C        Copy selected letters in the Windows clipboard 

Ctrl + V        Insert letters from the Windows clipboard

Ctrl + X        Cut selected letters and copy to the Windows clipboard

Ctrl + Ins        Copy selected letters to the Windows clipboard 

Shift + Ins        Insert letters from the Windows clipboard

Shift + Del        Delete text and copy into the Windows clipboard

Ctrl + F12        Display all characters of a font

Ctlr + Spacebar        Screen shifting, so the actual cursor position is in the centre of the screen

Arrow keys        Naviate through the text

Shift+Arrow keys        Select text

Home        Jump to line start

End        Jump to line end



4. Keyboard in the auxiliary lines mode

Del 

Backspace        Delete the current point or the selected figure

C        Switch to closed curve 

G        Switch to straight line

K        Switch to curve

V        Vectorize with AutoTrace function

Spacebar        Screen shifting, so that the current selected point or the selected figure is in the centre of the screen

Arrow keys        Navigate through coordinate points



5. Keyboard in coordinate and stitch mode

Enter        In automatic mode: Calculate the automatic and then switch to stitch mode.
In stitch mode: Switch to the most recently selected type of automatic.

Del (delete)

Backspace        Delete the current point.

Ins (insert)        Switch between insert and overwrite mode.

End        Jump to the end of the automatic or next special function.

Home        Jump to start of automatic or previous special function.

A        Automatic mode activate contour.

B        Width for centre line input digitizing (Only for centre line input mode).

       Finally 2 points must be digitized to give the width of line.

C        Switch to closed curve (Only in automatic mode).

D        Select stitch density input field (Only in area input).

D        Cut selected stitch in the middle (Only in manual mode)

E        Divide (Design partitioning) (Only in manual mode)

E        Shift end point (Only in automatic mode).

F        Insert single macro (Only in manual mode)

G        Switch to straight line input (only in automatic mode).

H        New hole (Only in area input)

I        New Island (Only in area input)

K        Switch to curves (Only in automatic mode)

L        Select stitch length input field (Only in automatic mode).

M        Automatic mode activate centre line.

N        Select needle number input field.

O        Switch needle on/off (Only in manual mode).

O        Switch to filled curve (Only in area input and Punch2)

P        Activate pair wise input in automatic mode.

Q        Recalculate the automatic.

R        Activate line (Running) (not for contour input)

S        Stop function (Only in manual mode).

S        Select type of stitch (Only in automatic mode) the type of stitch is selected by inputting its identifier (1-9 and a-z)

T        Thread trimming (Only in manual mode).

T        New separating line or branch (Only in automatic mode).

U        Activate stitch direction input (outer contour only)

V        Vectorize with AutoTrace function

W        New stitch direction (Only in contour input mode)

Z        Switch to branches input (Only input mode segmented or running line)

1        Cursor engages in 15°-steps relative to previous point

2        Cursor engages in 15°-steps relative to next point

Ctrl + 0        Insert zero-stitch

Ctrl + C        Copy the block which contains the selected stitch/coordinate (to the internal clipboard) 

Ctrl + E        Insert double stitch

Ctrl + F        Search for machine functions...

Ctrl + M        Insert block with 3-point-technique

Ctrl + Q        Fade in or out alphanumerical stitch display

Ctrl + V        Insert the copied block with menu for choice of size and number

F5        Display next error (Check VOMAG)

Shift + F5        Display previous error (Check VOMAG)

F9        Switch between digitizer and mouse-mode

Shift + Ins        Insert the copied block with menu for choice of size and number

Ctrl + Ins        Copy the block which contains the selected stitch/coordinate (to the internal clipboard) 

Ctrl + Del        Delete all reference data of the selected automatic.

Spacebar        Screen shifting, so that the current selected coordinate is in the centre of the screen

Arrow keys        navigate forward / back through design



6. Mouse

left button        Punching points

Double-click        Sets a corner in automatic mode

left        Insert a sequin if sequin mode is activated

right button        Display popup menu at current mouse position.

mid button        Move the currently selected point to mouse position

mouse wheel        Navigate through design like arrow keys


For scrolling the display press right mouse button and move out of

the window



7. Cursor on digitizer (in digitizing mode)

1        Punching of points (as with left mouse button) (also double click)

2        Punching of jump stitches

3 (F9)        Switch from digitizing mode to mouse mode (as with middle mouse button).

4        Same as right mouse button (without displaying menu)

5 (S)        Stop function (Only in manual mode).

5 (B)        Digitize width of center line (Only in center line input mode).

       Finally 2 points must be digitized to give the width of line.

6 (T)        Thread trimming (Only in manual mode).

6 (T)        New division line (Only in automatic mode).

7 (C)        Switch to closed curve (Only in automatic mode ).

8 (Del)        Deletion of the current point.

9 (G)        Switch to straight line (Only in automatic mode).

9 (R)        Activate line input mode (Running) (not for contour input)

10 (K)        Switch to curve (Only in automatic mode).

10 (A)        Automatic mode activate contour input (Only in manual mode).

11 (H)        New hole (Only for area input)

11 (M)        Automatic mode activate center line input (Only in manual mode).

12 (P)        Automatic mode activate pair wise input (Only in manual mode).

12 (W)        New stitch direction (only for contour input)

12 (P/M)        Switch between pair wise / center line input(Only in segmented mode).

13 (Ins)        Switch between insert/overwrite mode.

14        

15 (E)        Divide (Design partitioning) (Only in manual mode)

15 (E)        Shift end point (Only in automatic mode).

16 (Enter)        In automatic mode calculate the automatics and then switch to stitch mode.
In stitch mode switch to the most recently selected type of automatic.


Created with the Personal Edition of HelpNDoc: Eliminate the Struggles of Documentation with a Help Authoring Tool